Orbeco COND 200 Conductivity Meter

COND 200 Conductivity Meter The Series 200 Electrochemistry instruments are rugged, high performance handheld meters that are specifically designed for use in both the laboratory and the field. Features of the COND 200 include: Conductivity, Total Dissolved Solids ( TDS) , Salinity and Temperature measurement Durable 4-pole conductivity cell offering highest precision Automatic temperature compensation ( ATC) Min/ Max value storage Internal memory for 20 data sets Linear and non-linear temperature compensation ( EN27888) Calibration against standard solutions Low battery and battery change indicator Shock-absorbing rubber protective housing Battery operation period up to 3, 000 hours Waterproof Conductivity: 0.0 to 200.0 ¼ S/ cm 0 to 2000 ¼ S/ cm 0.00 to 20.00 mS/ cm 0 to 200.0 mS/ cm Resistance: 0.005 to 100.0 kOhm* cm O2 Saturation: 0.0 to 250.0% 0 to 600 % TDS: 0 TO 1999 mg/ l Salinity: 0.0 to 70.0 g/ kg Accuracy: ± 0.5% of results ± 0.5% FS ( ± 3 digits) Temperature : -5.0 to 100 ° C 23.0 to 212 ° F Accuracy: ± 0.3K Cell Constant: 0.50 ± 0.10 cm -1 Temperature Compensation: selectable: -linear, 0.3 to 3.0 % K -non-liner in acc. with EN 27 888 -no compensation Reference Temperature: 20° C and 25° C Calibration: 1-point Calibration in the range from 1000 to 2000 ¼ S/ cm Nominal Temperature: 25° C Operating Temperature: Unit: 0 to + 50° C Measuring cell: -5 to 80 ° C ( up to 100° C for short periods) Power Supply: 4 x 1.5V batteries, type AA Operating time up to 1500 hours Power Consumption: ca.2 mA, max. 4.2 mA Auto-off Function: 0-120 minutes Dimensions: ( L x W x H) 6.89 x 5.52 x 1.77 inches Weight: Approximately 580g Measuring Cell: 4-pole conductivity measuring cell with integrated temperature sensor( NTC 10kOhn) . Electrode material: special graphite Shaft material: epoxy Temperature sensor: stainless steel Dimensions: diameter 12mm, 120 mm long Conformity: CE