Detail Fluke-8845A Bench Multimeters
Specifications
Maximum alternating current ( AC) input 10 amp
Maximum direct current ( DC) input 10 amp
Maximum AC voltage input 750V
Maximum DC voltage input 1000V
Maximum resistance detected 100 megaohms
Maximum frequency detected 300kHz
Power requirement 100/ 120/ 220/ 240V, user selectable
Standards met International Electrotechnical Commission ( IEC) safety standard 61010: 2001; European Union EMC ( EN) EN61326-1: 2006, EN61326-2-1: 2006; Underwriters Laboratory ( UL) 61010-1A1; Canadian Standards Association ( CSA) 61010.1; Category I installations up to 1000V; Category II installations up to 600V
Weight 3.6kg/ 8lb.
Dimensions 88 x 217 x 297 mm/ 3.46 x 8.56 x 11.7 inches ( H x W x D)
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission ( IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
What' s in the Box?
Fluke 8845A bench-top digital multimeter
TL71 Test Lead Set
LCI 120V/ 15 amp power cord
USB to RS232 Cable Adapter
ISO 17025 Accredited Certificate of Calibration
WEEE Information Sheet
FlukeView Forms Software, Basic
Programmer' s guide
Instructions
Tampilkan Lebih Banyak